材料力學

出版時間:2004-2  出版社:高等教育出版社  作者:希伯勒  
Tag標簽:無  

前言

本書由R.C.Hibbeler教授編著,1991年出版第1版,2003年出版第5版。自1974年以來,R.C.Hibbeler教授還編著有Engineer ingMechaniCS,Structual hnalysi S與Mechanics for Engineers等9種教材。R.C.Hibbeler教授在25程力學教育方面,作出了很大貢獻,他編著的教材,在美國得到廣泛采用,在國際同行中也得到普遍好評。本書重視基本概念、基本理論-9基本方法的講述,思路清晰,層次分明,既簡明易懂,又論述嚴謹。全書選編了211個例題,通過這些例題,許多解題的方法-9技巧,得到了具體而生動地揭示,提高了學生分析問題的能力。本書在許多節的后面,均安排了“重點”(Important Point s)-9“分析方法”(Procedure for AnalysiS),這些提示對主要概念、理論-9方法進行了高度概括,論述精要,對學生學習有很大的幫助。本書在聯系X-程實際方面,非常突出。書中編選的例題-9習題(多達1600個),大部分甚至絕大部分來自25程實際或具有工程背景。更新穎的是,在本書每一章的開始-9每一節的頁旁,均附有X-程圖片,用以說明該章或該節內容的工程背景-9應用。材料力學作為工程力學的一個重要分支,培養學生的工程意識與分析解決工程實際問題的能力,是十分重要的。本書第1-9第2章分別講述應力-9應變的概念。

內容概要

  本書重視基本概念、基本理論與基本方法的講述,思路清晰,層次分明,既簡明易懂,又論述嚴謹。全書選編了211個例題,通過這些例題,許多解題的方法與技巧,得到了具體而生動地揭示,提高了學生分析問題的能力。許多節的后面,均安排了"重點"與"分析方法",這些提示對主要概念、理論與方法進行了高度概括,論述精要,對學生學習有很大的幫助。本書第1與第2章分別講述應力與應變的概念。第3章介紹材料的力學性能。第4,5與第6各章分別論述構件在軸向加載、扭轉與彎曲時的應力與變形,涵蓋線彈性與非彈性,涉及應力集中與殘余應力。第7章研究梁橫向剪切時的應力,包括薄壁梁的剪流與剪心。第8章討論組合載荷問題。第9與第1O章分別講述應力與應變的變換,在第10章還介紹了失效理論。第11章介紹梁與軸的設計,第12章研究梁與軸的位移。第13章講述柱的穩定性。第14章講述能量法,包括虛功原理、單位載荷法、卡氏定理與沖擊載荷問題。關于截面的幾何性質則集中在附錄A給出。本書是一本優秀教材,其內容與我國當前高等工科院校材料力學的教學要求也相當接近,本書既可作為進行雙語教學材料力學課程的基本教材,也可作為學習材料力學課程的主要參考書。

作者簡介

作者:(美國)希伯勒(Hibbeler.R.C)

書籍目錄

PREFACE
1 STRESS
 1.1 introduction
 1.2 equilibrium of a deformable Body
 1.3 stress
 1.4 Average Normal stress in an Axially loaded bar
 1.5 Average shear stress
 1.6 Allowable stress
2 STRAIN
 2.1 deformation
 2.2 strain
3 mechanical properties of materials
 3.1 The tension and compression test
 3.2 The stress-Strain Diagram
 3.3 stress-strain behavior of ductile and brittle materials
 3.4 Hooke’s law
 3.5 strain energy
 3.6 Poisson’s ratio
 3.7 the shear stress-strain diagram
 3.8 failure of materials due to creep and fatigue
4 axial load
 4.1 Saint-Venant’s principle
 4.2 Elastic deformation of an axially loaded member
 4.3 principle of superposition
 4.4 statically indeterminate axially loaded member
 4.5 the force method of analysis for axially loaded members
 4.6 thermal stress
 4.7 stress concentrations
 4.8 inelastic axial deformation
 4.9 residual stress
5 torsion
 5.1 Torsional deformation of a circular shaft
 5.2 the torsion formula
 5.3 power transmission
 5.4 angle of twist
 5.5 statically indeterminate torque-loaded members
 5.6 solid noncircular shafts
 5.7 thin-walled tubes having closed cross section
 5.8 stress concentration
 5.9 inelastic torsion
 5.10 residual stress
6 bending
 6.1 shear and moment diagrams
 6.2 graphical method for constructing shear and moment
diagrams
 6.3 bending deformation of a straight member
7 TRANSVERSE SHEAR
 7.1 Shear in Straight Members
 7.2 The Shear Formula
 7.3 Shear Stresses in Beams
 7.4 Shear Flow in Built-up Members
 7.5 Shear Flow in Thin-Walled Members
 7.6 Shear Center
8 COMBINED LOADINGS
 8.1 Thin-Walled Vessels
 8.2 State of Stress Caused by Combined Loadings
9 STRESS TRANSFORMATION
 9.1 Plane-Stress Transformation
 9.2 General Equations of Plane-Stress Transformation
 9.3 Principal Stresses and Maximum In-Plane Shear Stress
 9.4 Mohr’s Circle——Plane Stress
 9.5 Stress in Shafts Due to Axial Load and Torsion
 9.6 Stress Variations Throughout a Prismatic Beam
 9.7 Absolute Maximum Shear Stress
10 STRAIN TRANSFORMATION
 10.1 Plane Strain
 10.2 General Equations of Plane-Strain Transformation
 10.3 Mohr's Circle——Plane Strain
 10.4 Absolute Maximum Shear Strain
 10.5 Strain Rosettes
 10.6 Material-Property RelatiOnshiDs5
 10.7 Theories of Failure
11 DESIGN OF BEAMS AND SHAFTS
 11.1 Basis for Beam Design
 11.2 Prismatic Beam Design
 11.3 Fully Stressed Beams
 11.4 Shaft Design
12 DEFLECTIONS OF BEAMMS AND SHAFIS
 12.1 The Elastic Curve
 12.2 Slope and Displacement by Integration
 12.3 Discontinuity Functions
 12.4 Slope and Displacement by the Moment-Area Method
 12.5 Method of Superposition
 12.6 Statically Indeterminate Beams and Shafts
 12.7 Statically Indeterminate Beams and Shafts-Method of
Integration
 12.8 Statically Indeterminate Beams and Shafts Moment-Area
Method
 12.9 Statically Indeterminate Beams and Shaft-Method of
Superposition
13 BUCKLING OF COLUMNS
 13.1 critical Load
 13.2 Ideal Column with Pin Supports
 13.3 Columns Having Various Types of Supports
 13.4 The Secant Formula
 13.5 Inelastic Buckling
 13.6 Design of Columns for Concentric Loading
 13.7 Design of Columns for Eccentric Loading
14 ENERGY METHODS
 A GEOMETRIC PROPERTIES OF AN AREA
 B GEOMETRICAL PROPERTIES OF STRUCTURAL SHAPES
 C SLOPES AND DEFLECTIONS OF BEAMS
 D REVIEW FOR THE FUNDAMENTALS OF ENGINEERING EXAM
ANSWERS
INDEX

章節摘錄

插圖:

編輯推薦

《材料力學(第5版影印版)》是一本優秀教材,其內容與我國當前高等工科院校材料力學的教學要求也相當接近,《材料力學(第5版影印版)》既可作為進行雙語教學材料力學課程的基本教材,也可作為學習材料力學課程的主要參考書。

圖書封面

圖書標簽Tags

無

評論、評分、閱讀與下載


    材料力學 PDF格式下載


用戶評論 (總計10條)

 
 

  •   國外的教材編的很有特的,這本希伯勒的《材料力學》作為搞工科的人很值得一讀。
  •   很清楚,字太密了,不過英文影印版書都這樣
  •   很厚的書,國外教材借鑒學習下。
  •   這本書幫單位采購的,說是必備的工具書,所以只能點評這些。可惜是英文版的,沒用了,也不曉得能不能退掉,時間太久了,要有人需要這書的話,全新書原價5折出手,聯系QQ27010338,謝謝!
  •   知識的安排,解讀很有特點
  •   把它作為參考,看對工作能否帶來幫助
  •   書的封底折了角,美中不足
  •   比較基礎,英文版,適合英文好的同學看看
  •   英文版的,留著慢慢看
  •   雖然書籍有些年份了,但是專業價值還是很好。
 

250萬本中文圖書簡介、評論、評分,PDF格式免費下載。 第一圖書網 手機版

京ICP備13047387號-7