化學化工專業英語

前言

　　隨著社會對化學化工專業技術人才素質要求的提高，具備化工專業知識技能并掌握化工專業英語的技術人才越來越受到企業尤其是中外合資企業的歡迎。為適應新時期高職高專化工專業對學生的能力培養和綜合素質的要求，特編寫該書?！　【帉戇^程中努力體現以下特點?！　。?）所選內容盡量通俗易懂，突出職業教育特色，適合高職學生使用?！　。?）所選內容適應性強，覆蓋面寬，有助于學生閱讀科技英語水平和專業技能水平的提高。主要內容包括化工分析、化工單元操作過程、化工設備、石油化工、精細化工、高分子化工、煤化工等。附錄中設有常見酸堿鹽、有機物的英文名稱，常用英文化學分子式、方程式及數學式的讀法，化學學科中的詞綴、化學元素表、專業英語的翻譯方法和技巧等?！　。?）對課文中出現的化工技術術語、操作用語等都進行了注釋。習題及閱讀理解部分都強調了學生對化工專業技術術語及操作用語的掌握?！　〈髴c職業學院張榮老師擔任本書主編，并編寫了Unit1～Unit 3、附錄A～附錄E。遼寧科技學院鄢景森老師擔任主編，并編寫了Unit 8、Unit 15、Unit 16、附錄F；廣東紡織職業技術學院郭俊旺老師編寫了Unit4～unit 7、Unit 12、Unit 13；遼寧科技學院崔紹波老師編寫了Unit 10；河南城建學院王要令老師編寫了Unit 9、Unit 11、Unit 14。在本書編寫過程中，北京化工大學于運花教授給予了悉心指導，并提供了許多寶貴的建議，在此表示感謝?！　”窘滩纳婕皟?nèi)容廣，因編者水平有限，疏漏和不妥之處在所難免，懇請讀者提出寶貴意見，以便完善。

內容概要

本書主要內容包括化工分析、化工單元操作過程、化工設備、石油化工、精細化工、高分子化工、煤化工等。選文側重于實際工藝及技術操作，將基礎知識與工程實際相結合。附錄中設有常見酸堿鹽、有機物的英文名稱，常用英文化學分子式、方程式及數學式的讀法，化學學科中的詞綴、化學元素表、專業英語的翻譯方法和技巧等。    本書可作為高職高專院?；瘜W(xué)化工專業英語教材，也可供相關人員參考使用。

書籍目錄

Unit 1  Titrimetric AnalysisUnit 2  Acid—base TitrationUnit 3  Precipitation TitrationUnit 4  Concept ofUnit OperationUnit 5  Fluid MechanicsUnit 6  PumpsUnit 7  Heat TransferUnit 8  Petroleum Refining ProcessUnit 9  Introduction to Instrumental AnalysisUnit 10  Petroleum AnalysisUnit 11  Infrared Absorption SpectroscopyUnit 12  MacroemulsionsUnit 13  Micelle FormationUnit 14  Chemical Instrumentation and Process ControlUnit 15  Fischer-Tropsch SynthesisUnit 16  Green Chemistry附錄A  常見酸堿鹽附錄B  常見有機物附錄C  常用英文化學分子式、方程式及數學式的讀法附錄D  化學學科中的詞綴附錄E  化學元素表附錄F  專業英語的翻譯方法和技巧參考文獻

章節摘錄

　　Measurement　　The predominant methods of measuring the properties of petroleum products are covered by approximately seven test methods that are used in the determination of bulk quantities of liquid petroleum and its products.　　Testing for suspended water and sediment is used primarily with fuel oils， where appreciableamounts of water and sediment may cause fouling of facilities for handling the oil and give troublein burner mechanisms. Three standard methods are available for this determination. The centrifuge method gives the total water and sediment content of the sample by volume， the distillation method gives the water only， volumetrically， and the extraction method gives the solid sediment in percentage by weight.　　The determination of density or specific gravity in the measurement and calculation of volume of petroleum products is important because gravity is an index of the weight of a measured volume of the product. Two scales are in use in the petroleum industry， specific gravity and API gravity， the determination being made in each case by means of a hydrometer of constant weight displacing avariable volume of oil. The reading obtained depends on both the gravity and the temperature of theoil.　　Gauging petroleum products involves the use of procedures for determining the liquid contents of tanks， ships and barges， tank cars， and tank trucks. Depth of liquid is determined by gauging through specified hatches or by reading gauge glasses or other devices. There are two basic types of gauges， in nage and outage. The procedures used depend on the type of tank to be gauged， its equip ment， and the gauging apparatus.[6]　　An in nage gauge is the depth of liquid in a tank measured from the surface of the liquid to the tank bottom or to a datum plate attached to the shell or bottom. The in nage gauge is used directly with the tank calibration table and the temperature of the product to calculate the volume of the product. On the other hand， an outage gauge is the distance between the surface of the product in the tank and the reference point above the surface， which is usually located in the gauging hatch. Theoutage gauge is used either directly or indirectly with the tank calibration table and the temperature of the product to calculate the volume of product. The amount of any flee water and sediment in the bottom of the tank is also gauged so that corrections can be made when calculating the net volume of the crude oil or petroleum product.　　There are also procedures for determining the temperatures of petroleum and its products when in a liquid state. Temperatures are deter minedat specified locations in tanks， ships and barges， tank cars， and tank trucks. For a non-pressure tank， a temperature is obtained by lowering a tank thermometer of proper range through the gauging hatch to the specified liquid level. After the entirethermometer assembly has had time to attain the temperature of the product， the thermometer is withdrawn and read quickly. This procedure is also used for low-pressure tanks equipped with gauging hatches or standpipes and for any pressure tank that has a pressure lock. For tanks equipped with thermometer wells， temperatures are obtained by reading thermometers placed in the wells with their bulbs at the desired tank levels.

圖書封面

評論、評分、閱讀與下載

---

    化學化工專業英語 PDF格式下載

---